Thia Hands-On course Implementing Cisco Unified Communications Manager, Part 2 (CIPT2) v9.0 prepares you for implementing Cisco Unified Communications solution in a multisite environment. It covers globalized call routing, Cisco Service Advertisement Framework (SAF) and Call Control Discovery (CCD), tail-end hop-off (TEHO), Cisco Unified Survivable Remote Site Telephony (SRST), and mobility features such as Device Mobility and Cisco Extension Mobility.
You will apply a dial plan for a multisite environment including TEHO, configure survivability for remote sites during WAN failure, and implement solutions to reduce bandwidth requirements in the IP WAN. You will also enable Call Admission Control (CAC), including Session Initiation Protocol (SIP) Preconditions and automated alternate routing (AAR).
Anyone on the path for their CCNP and Network professionals who install, configure, and
manage Cisco Unified Communications solutions.
Completion of CIPT1 course or a working knowledge of converged voice and data networks, MGCP, SIP, and H.323 protocols and their implementation on Cisco IOS gateways
Ability to configure and operate Cisco routers and switches
Ability to configure and operate Cisco Unified Communications Manager in a single-site environment
Module 1: Multisite Deployment Implementation
Lesson 1: Identifying Issues in a Multisite Deployment
- Multisite Deployment Issues Overview
- Quality Issues
- Bandwidth Issues
- Availability Issues
- Dial Plan Issues
- NAT and Security Issues
Lesson 2: Identifying Multisite Deployment Solutions
- Multisite Deployment Solution Overview
- QoS
- Solutions to Bandwidth Limitations
- Availability
- Dial Plan Solutions
- NAT and Security Solutions
Lesson 3: Implementing Multisite Connections
- Multisite Connection Options
- MGCP Gateway Implementation Review
- H.323 Gateway Implementation Review
- Trunk Implementation Overview
- SIP Trunk Implementation
- Intercluster and H.225 Trunk Implementation
Lesson 4: Implementing a Dial Plan for International Multisite Deployments
- Multisite Dial Plan Overview
- Implementing Site Codes for On-Net Calls
- Implementing PSTN Access in Cisco IOS Gateways
- Implementing Selective PSTN Breakout
- Implementing PSTN Backup for On-Net Intersite Calls
- Implementing TEHO
- Implementing Globalized Call Routing
- Considering Globalized Call-Routing Interdependencies
Module 2: Centralized Call-Processing Redundancy Implementation
Lesson 1: Examining Remote Site Redundancy Options
- Remote Site Redundancy Overview
- Cisco Unified SRST Operation
- MGCP Fallback Operation
- Cisco Unified SRST Versions and Feature Support
- Dial Plan Requirements for MGCP Fallback and Cisco Unified SRST Scenarios
Lesson 2: Implementing SRST and MGCP Fallback
- MGCP Fallback and Cisco Unified SRST Configuration Overview
- Cisco Unified Communications Manager SRST Configuration
- Cisco IOS Gateway SRST Configuration
- Cisco IOS Gateway MGCP Gateway Fallback Configuration
- Cisco Unified Communications Manager Dial Plan Configuration for SRST Support
- Cisco IOS Gateway MGCP Fallback and Cisco Unified SRST Dial Plan Configuration
Lesson 3: Implementing Cisco Unified Communications Manager Express in SRST Mode
- Cisco Unified Communications Manager Express Overview
- Cisco Unified Communications Manager Express Features
- General Configuration of Cisco Unified Communications Manager Express
- Configuration of Cisco Unified Communications Manager Express in SRST Mode
Module 3: Bandwidth Management and CAC Implementation
Lesson 1: Managing Bandwidth
- Bandwidth Management Overview
- Cisco Unified Communications Manager Codec Configuration
- Local Conference Bridge Implementation
- Transcoder Implementation
- Multicast MOH from Branch Router Flash Implementation
Lesson 2: Implementing CAC
- CAC Overview
- Standard Locations
- RSVP-Enabled Locations
- Automated Alternate Routing
- SIP Preconditions
- H.323 Gatekeeper CAC
Module 4: Implementation of Features and Applications for Multisite Deployments
Lesson 1: Implementing Device Mobility
- Issues with Devices Roaming Between Sites
- Device Mobility Overview
- Device Mobility Configuration Elements
- Device Mobility Operation
- Device Mobility Interaction with Globalized Call Routing
- Device Mobility Configuration
Lesson 2: Implementing Cisco Extension Mobility
- Issues when Users Roam Between Sites
- Cisco Extension Mobility Overview
- Cisco Extension Mobility Configuration Elements
- Cisco Extension Mobility Operation
- Cisco Extension Mobility Configuration
Lesson 3 – Video Integration with CUCM
- Telepresence
- Lab – 9971 Features and Video Integration
Module 5: Call Control Discovery
Lesson 1: Implementing SAF and CCD
- SAF and CCD Overview
- SAF Characteristics
- CCD Characteristics
- CCD Operation
- SAF and CCD Implementation
- CCD Considerations
Instructor-Led with numerous Hands-On labs and exercises.
BTS always provides equipment to have a very successful Hands-On course. BTS also encourages all attendees to bring their own equipment to the course. This will provide attendees the opportunity to incorporate their own gear into the labs and gain valuable training using their specific equipment.
