Website: http://www.btstraining.com
Toll Free: 1-877-Info2Day
Email: info@btstraining.com
Hands-On
EWSD Nokia (Siemens) Virtual Switch Maintenance and Troubleshooting
On-Site or Virtual Live Instructor-led
 
Course Description
The Nokia (formerly Siemens) EWSD Switching Support Course was created to help telco personnel continue to support the EWSD switching system with less reliance on vendor support options.

Intended as a follow-up to the EWSD Maintenance and Operations course, the support course will move personnel with a good working knowledge of the EWSD to the next level, providing them with both the knowledge and confidence to work on important parts of the switch for which they are less familiar. The course begins with a review of the system topology, ensuring a consistent understanding of the different LTG and DLU types, and remotes. The discussion then turns to the front end, with detailed descriptions of the Coordination Processors IOP Groups, its various processors, Common and Local Memory, plus various interfaces including X.25, serial, SCSI, etc. Significant detail is placed on the different SN network types, including DE345, and their various TimeSpace stage sub-configurations. An emphasis is placed upon the configuration for the local switch system that students work on.

DISP and SRCHALARM commands, plus MMN, FLM and Mask information within the system output messages, are all used to locate as much information about a fault as possible. A large number of past examples are used as practice, but any actual faults in the switch will also be analyzed carefully for the best course of troubleshooting. Predictions are made for the card modules that are most suspect. These results are then compared to the actual fixes performed from the past examples, and also to current maintenance-window diagnostic results, if applicable. Module replacement precautions and procedures are discussed in detail, including communication between COT personnel and the NOCSCC or other Tier-3 support.

Books such as the Exchange Configuration Document (ECD) and Cable Laying List (CLL) will be consulted to see how to find suspect cables and their part numbers, including their exact location on the backplane.

Our non-intrusive exercises equip the student to apply troubleshooting techniques for challenging faults, and then determine suspect module lists, including cables. The course is flexible, allowing the most important content for a particular group of students to be emphasized.
Students Will Learn
Target Audience
Technical staff such as NOCSCC personnel, plus certain Central Office Technicians and management will find the course very useful in responding to multiple types of switch alarms. Those seeking cross- training or system interoperability can also benefit from the course.
Prerequisites
The course is an accelerated version of a traditional support course. Students are recommended to have previously taken the EWSD Maintenance Troubleshooting course, or have a good working background of the EWSD switch and its MML commands.
Course Outline

Module 1 :   EWSD® System Overview

- System Hardware Components:

CP incl. various IOPs, MB, MDD/MOD, etc.

CCNC incl. SS7

SN incl. DE3/4/5 types

Time & Space Stages

LTG incl. LTGC, LTGK, LTGO

DIU Types

DLU incl. different DLU semi-shelf types

RCU, SmartRemote

DCO OneUp™ Option

SLC-96®

GR-303 Interfaces

IPH & ISDN options

- TDM and PCM Review

- Functional Block Diagram (Tier 2)

- Call Processing Example



Module 2 :   BMML & IO

- SmartCommander, OMT, EAI, SYPD

- Common MML Commands - CONF, DISP, STAT, LIST, etc.

- SRCHALARM, DISPINDIC

- DIAG vs. TEST

- System Output Messages:

MMN

FLN

Mask

Register Data

Module Listings

- CR & CANC Overview

- Review



Module 3 :   System Message Analysis

- Electronic Document Delivery System (EDDS)

- MMN Decoding

- FLN Decoding

- MMN/FLN Examples

- Hexadecimal, Decimal, and Binary

- Register Decoding

- Register Examples

- Diagnostic Response Messages

- System Reports

- Exercises



Module 4 :   General Hardware

- Documentation Types:

EDDS - .chm, Corrective Maintenance Practices: TLM, TAP, DLP

Book 0905 - Exchange Configuration Documents (ECD)

Cable Running/Laying List (CRL/CLL)

Book 1088 - Maintenance Summary Guide

Book 0825 - Installation and Acceptance

Job Engineering Docs

- Siemens Packaging - SIPAC, SIVAPAC incl. backplane pinouts

- Determining Suspect Modules

- Locating Modules - Bay, Frame, MUT, MOLOC

- Changing Modules:

NOC-CO Interaction 

Verify the Fault

Precautions, ESD, VCC

OST States

Test & Contingency Plans

Module Extraction/Seating

Verify the Repair

Clearing Alarms

- Module Practice Exercises

- Examples

- Review



Module 5 :   Line Trunk Group (LTG) & Digital Line Unit (DLU)

- LTG/DLU Types:  Which Do You Have?

LTGC/LTGK/LTGO

DLUA/DLUB incl. Shelf Types - DLU(x)

Group Switch Versions

DIU vs. LDIE

Speech Highways & CAS

SDCK interfaces

- Procedures:

Delivery Method
LIVE Virtual Instructor-led with a flexible approach that adjusts content most relevant to students. Includes various non-intrusive labs, demonstrations, and exercises to help students focus on and retain the material presented.
Equipment Requirements
(This apply's to our hands-on courses only)
Students must have Virtual and or remote access to a EWSD Switch for this training.

BTS always provides equipment to have a very successful Hands-On course. BTS also encourages all attendees to bring their own equipment to the course. This will provide attendees the opportunity to incorporate their own gear into the labs and gain valuable training using their specific equipment.

Course Length
5 Days

Website: http://www.btstraining.com
Toll Free: 1-877-Info2Day
Email: info@btstraining.com